四虎影院精品-四虎影院紧急入口-四虎影院黄色-四虎影院海外永久-四虎影院国产精品-四虎影院国产

What kind of trimming die can reduce the cost of investment?

The upper die of CNC punching and cutting die. The improvement of the mold structure on the punching die. So that the clamp into the upper mold in the horizontal plane projection range, which can reduce the clamping side, thereby saving a large number of plates. The CNC punch includes an automatic feeding clamp, the upper mold comprises a mold sleeve, a die punch and a pressing plate. The bottom surface of the pressing plate is provided with a long working hole, a working hole through which the upper die punch is reciprocated The slot is surrounded by a lapel. This product in the top of the bottom of the pressure plate is set up a circle of convex side, can also be considered in the bottom of the pressing plate "cut" to the working hole at least one side of the cross section of the arch material, forming a stepped surface; Leaving a gap that could be inserted into the clamp. This will reduce the clamping edge of the sheet to improve the utilization of sheet metal. This product greatly improves the utilization of sheet metal, reduce costs.

And a second punch corresponding to the second discharge port; the first punch of the product and the second punch corresponding to the second discharge port, the first punch corresponding to the first discharge port, the positioning block, and the second punch corresponding to the second discharge port; There is no gap in the middle of the punch combination. The product provides unilateral edge trimming die, because after two blanking products after the gap between the products, so no material production, effective saving of raw materials, reducing the cost of material inputs.